Separators for Slurry and Digestate

SLURRY AND DIGESTATE SEPARATOR
Designed for maximum exploitation of both solid and liquid separated fractions.

Completely built in stainless steel, ideal for working with slurry.

The tungsten coating gives the steel spiral screw greater wear resistance and a longer useful life, without affecting the characteristics of the work.

A labyrinth device prevents liquid entering the gearbox, providing sealing between the screw and the gearbox and preventing its deterioration.

Triangular mesh sieve Aisi-316, either standard or extra-reinforced prevents solid particles from clogging the sieve.
Possibility 0.25 - 0.5 - 0.75mm

Large hatch, facilitates an internal inspection of the sieve.

Floating sieve and centered on both sides that guarantee a perfect coupling with the spiral, obtaining a greater performance and duration of the same.

Possibility of adapting prefiltration ramp, to increase its performance (see Kompack® equipment).

Solid plug signal detector, stops the operation of the pump and the separator in case of non-compaction.

Adjustable collar, allows us, in case of change of% of solid material of the slurry, adapt it to ensure maximum performance.
Front neck with hinge, which allows the manipulation of thread and sieve facilitating the maintenance functions of the equipment.
Pressing gates with counterweights, which regulate the percentage of dry matter at all times.

OPTIONAL:
Interior-cleaning system.
A circuit of nozzles installed in the filter box clean the outside of the sieve of embedded solid impurities thus preventing them passing to the liquid fraction.
Possibility of programming it to start every time the machine stops.

Different models, depending on the slurry to be treated.